2024.9.2
Home ▸ Integrations ▸

Flipr

Flipr is a smart pool monitor that publishes data to the cloud via SigFox. Flipr sends data like pH, chlorine or temperature to a cloud server on a regular basis in order to monitor your pool. This integration gives you access to this information on Home Assistant in addition to the vendor’s smartphone application.

There is currently support for the following information within Home Assistant:

  • Chlorine Level
  • pH
  • Water Temperature
  • Red OX Level
  • Last measure date
  • pH Status Indicator
  • Chlorine Status Indicator
  • Battery Level

Prerequisites

You will need to use the standalone app for this device to register a username and password.

Configuration

To add the Flipr integration to your Home Assistant instance, use this My button:

Manual configuration steps

If the above My button doesn’t work, you can also perform the following steps manually:

Tips

It is recommended that you create your own card with the following sensors where [fliprid] is the id of your flipr:

  • sensor.flipr_[fliprid]_chlorine
  • sensor.flipr_[fliprid]_ph
  • sensor.flipr_[fliprid]_red_ox
  • sensor.flipr_[fliprid]_water_temp
  • sensor.flipr_[fliprid]_last_measured
  • sensor.flipr_[fliprid]_battery_level

Leave binary_sensor.flipr_[fliprid]_ph_status and binary_sensor.flipr_[fliprid]_chlorine_status as badges.