2024.9.2
Home ▸ Integrations ▸

BleBox devices

BleBox produces small, low-power, surprisingly affordable, feature-rich WiFi devices for serverless home automation.

Configuration

To add the BleBox devices integration to your Home Assistant instance, use this My button:

BleBox devices can be auto-discovered by Home Assistant. If an instance was found, it will be shown as Discovered. You can then set it up right away.

Manual configuration steps

If it wasn’t discovered automatically, don’t worry! You can set up a manual integration entry:

  • Browse to your Home Assistant instance.

  • Go to Settings > Devices & Services.

  • In the bottom right corner, select the Add Integration button.

  • From the list, select BleBox devices.

  • Follow the instructions on screen to complete the setup.

For the best experience, make sure your BleBox devices have the most recent available firmware installed.

BleBox controllers

rollerGate

This integration adds the Blebox device as a cover entity to Home Assistant.

Key supported features

  • Open
  • Close
  • Position
  • Stop

gateBox

This integration adds the Blebox device as a cover entity to Home Assistant.

Key supported features

  • Open (trigger primary output)
  • Close (trigger primary output)
  • Stop (trigger secondary output)
  • Gate state (open, close, unknown)

Additional features

  • “stop” requires setting your device’s secondary trigger as stop (via website or phone app).

gateBox Pro

This integration adds the Blebox device as a cover entity to Home Assistant.

Key supported features

  • Open (trigger primary output)
  • Close (trigger primary output)
  • Stop (trigger secondary output)
  • Gate state (open, close, unknown)

Additional features

  • “stop” requires setting your device’s secondary trigger as stop (via website or phone app).

doorBox

This integration adds the Blebox device as a cover entity to Home Assistant.

Key supported features

  • Open
  • Door state (open, close, unknown)

saunaBox

This integration adds the Blebox device as a climate entity to Home Assistant.

Key supported features

  • On
  • Off
  • Setting target temperature
  • Read current temperature

thermoBox

This integration adds the Blebox device as a climate entity to Home Assistant.

Key supported features

  • On
  • Off
  • Set target temperature
  • Read current temperature

Additional features

  • Changing operation mode (cooling/heating) requires direct access to device or from wBox app

shutterBox

This integration adds the Blebox device as a cover entity to Home Assistant.

Key supported features

  • Open
  • Close
  • Position
  • Tilt regulation

shutterBoxDC

This integration adds the Blebox device as a cover entity to Home Assistant.

Key supported features

  • Open
  • Close
  • Position
  • Tilt regulation

shutterBox DIN

This integration adds the Blebox device as a cover entity to Home Assistant.

Key supported features

  • Open
  • Close
  • Position
  • Tilt regulation

switchBox

This integration adds the Blebox device as a switch entity to Home Assistant.

Key supported features

  • On
  • Off
  • Energy consumption measurement

switchBox DIN

This integration adds the Blebox device as a switch entity to Home Assistant.

Key supported features

  • On
  • Off
  • Energy consumption measurement

switchBoxD

This integration adds the Blebox device as a switch entity to Home Assistant.

Key supported features

  • On
  • Off
  • Energy consumption measurement

switchBoxD DIN

This integration adds the Blebox device as a switch entity to Home Assistant.

Key supported features

  • On
  • Off
  • Energy consumption measurement

switchBoxDC

This integration adds the Blebox device as a switch entity to Home Assistant.

Key supported features

  • On
  • Off

switchBox LIGHT

This integration adds the Blebox device as a switch entity to Home Assistant.

Key supported features

  • On
  • Off

switchBoxT PRO

This integration adds the Blebox device as a switch entity to Home Assistant.

Key supported features

  • On
  • Off

dimmerBox

This integration adds the Blebox device as a light entity to Home Assistant.

Key supported features

  • On
  • Off
  • Brightness

wLightBox

This integration adds the Blebox device as a light entity to Home Assistant.

Key supported features

  • On
  • Off
  • Effects
  • Brightness
  • Color

Additional features

  • Changing color mode available from direct device access or wBox app. Device needs to be reloaded from Home Assistant.

wLightBox PRO

This integration adds the Blebox device as a light entity to Home Assistant.

Key supported features

  • On
  • Off
  • Effects
  • Brightness
  • Color

Additional features

  • Changing color mode available from direct device access or wBox app. Device needs to be reloaded from Home Assistant.

wLightBoxS

This integration adds the Blebox device as a light entity to Home Assistant.

Key supported features

  • On
  • Off
  • Effects
  • Brightness

wLightBoxS PRO

This integration adds the Blebox device as a light entity to Home Assistant.

Key supported features

  • On
  • Off
  • Effects
  • Brightness

pixelBox

This integration adds the Blebox device as a light entity to Home Assistant.

Key supported features

  • On
  • Off
  • Effects
  • Brightness
  • Color

tempSensor

This integration adds the Blebox device as a sensor entity to Home Assistant.

Key supported features

  • Periodic read of temperature

tempSensorAC

This integration adds the Blebox device as a sensor entity to Home Assistant.

Key supported features

  • Periodic read of temperature for all probes

tempSensor PRO

This integration adds the Blebox device as a sensor entity to Home Assistant.

Key supported features

  • Periodic read of temperature for all probes

humiditySensor

This integration adds the Blebox device as a sensor entity to Home Assistant.

Key supported features

  • Periodic read of humidity
  • Periodic read of temperature

wind&RainSensor

This integration adds the Blebox device as a sensor & binary sensor entity to Home Assistant.

Key supported features

  • Periodic read of current wind speed
  • Periodic read of state of rain detection

rainSensor

This integration adds the Blebox device as a binary sensor entity to Home Assistant.

Key supported features

  • Periodic read of state of rain detection

airSensor

This integration adds the Blebox device as a sensor entity to Home Assistant.

Key supported features

  • Periodic read of:
    • pm1
    • pm2.5
    • pm10

windSensor PRO

This integration adds the Blebox device as a sensor entity to Home Assistant.

Key supported features

  • Periodic read of current wind speed

“BleBox inside” controllers

Simon 54 GO SHUTTER

This integration adds the Simon 54 GO device (“blebox inside”) as a cover entity to Home Assistant.

Key supported features

  • Open
  • Close
  • Position
  • Tilt regulation

Simon 54 GO SWITCH

This integration adds the Simon 54 GO device (“blebox inside”) as a switch entity to Home Assistant.

Key supported features

  • On
  • Off

Simon 54 GO SWITCH D

This integration adds the Simon 54 GO device (“blebox inside”) as a switch entity to Home Assistant.

Key supported features

  • On
  • Off

Simon 54 GO LED 230V (dimmer)

This integration adds the Simon 54 GO device (“blebox inside”) as a switch entity to Home Assistant.

Key supported features

  • On
  • Off
  • Brightness

Simon 54 GO LED MONO

This integration adds the Simon 54 GO device (“blebox inside”) as a switch entity to Home Assistant.

Key supported features

  • On
  • Off
  • Effects
  • Brightness
  • Color

Simon 54 GO RGBW

This integration adds the Simon 54 GO device (“blebox inside”) as a switch entity to Home Assistant.

Key supported features

  • On
  • Off
  • Effects
  • Brightness
  • Color

Simon 55 GO SHUTTER

This integration adds the Simon 55 GO device (“blebox inside”) as a cover entity to Home Assistant.

Key supported features

  • Open
  • Close
  • Position
  • Tilt regulation

Simon 55 GO SWITCH

This integration adds the Simon 55 GO device (“blebox inside”) as a switch entity to Home Assistant.

Key supported features

  • On
  • Off

Simon 55 GO SWITCH D

This integration adds the Simon 55 GO device (“blebox inside”) as a switch entity to Home Assistant.

Key supported features

  • On
  • Off
  • Brightness

Simon 55 GO LED 230V (dimmer)

This integration adds the Simon 55 GO device (“blebox inside”) as a switch entity to Home Assistant.

Key supported features

  • On
  • Off
  • Brightness

Simon 55 GO LED MONO

This integration adds the Simon 55 GO device (“blebox inside”) as a switch entity to Home Assistant.

Key supported features

  • On
  • Off
  • Effects
  • Brightness
  • Color

Simon 55 GO RGBW

This integration adds the Simon 55 GO device (“blebox inside”) as a switch entity to Home Assistant.

Key supported features

  • On
  • Off
  • Effects
  • Brightness
  • Color

FAKRO FTP-V/FTU-V WiFi

This integration adds the Fakro device (“blebox inside”) as a cover entity to Home Assistant.

Key supported features

  • Open
  • Close
  • Position

FAKRO ARF/ARP WiFi

This integration adds the Fakro device (“blebox inside”) as a cover entity to Home Assistant.

Key supported features

  • Open
  • Close
  • Position

FAKRO ARZ/AMZ/VMZ WiFi

This integration adds the Fakro device (“blebox inside”) as a cover entity to Home Assistant.

Key supported features

  • Open
  • Close
  • Position

SABAJ TV K-SMRT-4 - WIFI RJ-45

This integration adds the SABAJ device (“blebox inside”) as a button entity to Home Assistant.

Key supported features

  • Open
  • Close
  • Up
  • Down
  • Fav

Wiśniowski RiCo

This integration adds the Wiśniowski device (“blebox inside”) as a cover entity to Home Assistant.

  • Open (trigger primary output)
  • Close (trigger primary output)
  • Stop (trigger secondary output)
  • Gate state (open, close, unknown) - only Pro version

Additional features

  • “stop” requires setting your device’s secondary trigger as stop (via website or phone app)

Polfendo smartGateControl

This integration adds the Polfendo device (“blebox inside”) as a cover entity to Home Assistant.

Key supported features

  • Open
  • Close
  • Position
  • Stop

Plast-met SMART LIGHT BOSSPIO

This integration adds the Plast-met device (“blebox inside”) as a light entity to Home Assistant.

Key supported features

  • On
  • Off
  • Effects
  • Brightness

Plast-met SMART LIGHT SIMPIO

This integration adds the Plast-met device (“blebox inside”) as a light entity to Home Assistant.

Key supported features

  • On
  • Off
  • Effects
  • Brightness

Tedee relay module

This integration adds the Tedee device (“blebox inside”) as a cover entity to Home Assistant.

Key supported features

  • Open
  • Door state (open, close, unknown)